A cubic, dark gray aluminum fuel tank on a black background. The tank is shown from an angled side view and features three shiny metallic fittings on its top surface: two angled hoses/necks and one cylindrical fitting
Renegade 21 (84 gal) Fuel Tank | BUILT TO OEM SPECS
Diagram of a Renegade 21 Water Tank, 14 gallon capacity. Dimensions are 26 1/2 inches long, 14 1/8 inches wide, and 10 inches high
"A 3D rendering of a rectangular, dark gray aluminum fuel tank on a black background. The tank features three shiny metallic fittings on its top surface, including two angled hoses/necks and one cylindrical fitting
A 3D rendering of a dark gray, rectangular fuel tank on a black background. The tank has a trapezoidal cutout on its front-facing bottom edge. Three prominent metallic fittings, including two angled hoses/necks and one cylindrical fitting, are visible on the top surface.
A long, white rectangular fuel tank, viewed from an angle, rendered on a black background. The tank features a large angled cutout on its front edge and has metallic fittings near the front and back of its top surface.
A 3D rendering of a dark gray, cubic aluminum fuel tank on a black background. Three shiny metallic fittings are visible on the top surface: two angled hoses/necks and one cylindrical fitting.
This image set features a white, fiberglass boat engine bracket and several fluid tanks, all displayed against a black or transparent checkered background. The main white fiberglass component is an engine bracket designed for a single outboard motor, identified by the product title "Bayliner Trophy 25 2052 1989 apex single engine brakcet". The bracket has a wide, T-shaped top mounting plate with rounded front corners, a circular access hatch centered on the top surface, and a raised transom mounting surface
Renegade 21 (84 gal) Fuel Tank | BUILT TO OEM SPECS
Renegade 21 (84 gal) Fuel Tank | BUILT TO OEM SPECS
A steep top-down 3D rendering of a long, black rectangular fuel tank on a black background. It shows a large fitting cluster near the back, a small fitting cluster near the front with an L-bracket, and a separate L-bracket in the center."
A low-angle side profile view of a long, dark rectangular fuel tank on a black background. A small fitting cluster is visible on the left end of the top edge, and a large fitting cluster is visible on the right end, with a central lifting ring
A 3D rendering of a light gray or silver cubic aluminum fuel tank on a black background. Two prominent shiny metallic fittings are visible on the top surface: one curved hose neck and one cylindrical fitting with an elbow.
A top-down close-up view of the fittings on a dark surface. Fittings include a small rectangular piece, a horizontal silver cylinder, a flat silver disc, and a large silver L-shaped component with a ring
Renegade 21 (84 gal) Fuel Tank | BUILT TO OEM SPECS
A cubic, dark gray aluminum fuel tank on a black background. The tank is shown from an angled side view and features three shiny metallic fittings on its top surface: two angled hoses/necks and one cylindrical fitting
Renegade 21 (84 gal) Fuel Tank | BUILT TO OEM SPECS
Diagram of a Renegade 21 Water Tank, 14 gallon capacity. Dimensions are 26 1/2 inches long, 14 1/8 inches wide, and 10 inches high
"A 3D rendering of a rectangular, dark gray aluminum fuel tank on a black background. The tank features three shiny metallic fittings on its top surface, including two angled hoses/necks and one cylindrical fitting
A 3D rendering of a dark gray, rectangular fuel tank on a black background. The tank has a trapezoidal cutout on its front-facing bottom edge. Three prominent metallic fittings, including two angled hoses/necks and one cylindrical fitting, are visible on the top surface.
A long, white rectangular fuel tank, viewed from an angle, rendered on a black background. The tank features a large angled cutout on its front edge and has metallic fittings near the front and back of its top surface.
A 3D rendering of a dark gray, cubic aluminum fuel tank on a black background. Three shiny metallic fittings are visible on the top surface: two angled hoses/necks and one cylindrical fitting.
This image set features a white, fiberglass boat engine bracket and several fluid tanks, all displayed against a black or transparent checkered background. The main white fiberglass component is an engine bracket designed for a single outboard motor, identified by the product title "Bayliner Trophy 25 2052 1989 apex single engine brakcet". The bracket has a wide, T-shaped top mounting plate with rounded front corners, a circular access hatch centered on the top surface, and a raised transom mounting surface
Renegade 21 (84 gal) Fuel Tank | BUILT TO OEM SPECS
Renegade 21 (84 gal) Fuel Tank | BUILT TO OEM SPECS
A steep top-down 3D rendering of a long, black rectangular fuel tank on a black background. It shows a large fitting cluster near the back, a small fitting cluster near the front with an L-bracket, and a separate L-bracket in the center."
A low-angle side profile view of a long, dark rectangular fuel tank on a black background. A small fitting cluster is visible on the left end of the top edge, and a large fitting cluster is visible on the right end, with a central lifting ring
A 3D rendering of a light gray or silver cubic aluminum fuel tank on a black background. Two prominent shiny metallic fittings are visible on the top surface: one curved hose neck and one cylindrical fitting with an elbow.
A top-down close-up view of the fittings on a dark surface. Fittings include a small rectangular piece, a horizontal silver cylinder, a flat silver disc, and a large silver L-shaped component with a ring
Renegade 21 (84 gal) Fuel Tank | BUILT TO OEM SPECS

Renegade 21 (84 gal) Fuel Tank | BUILT TO OEM SPECS

$ 2,062.00
/
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.

Restore the range and performance of your Renegade 21 with our 84-gallon, exact-fit replacement fuel tank. Engineered as a precision drop-in for this high-performance hull, this tank provides the ample fuel capacity you need for extended days on the water without worrying about range. Built from heavy-duty, TIG-welded aluminum to match the rugged build quality of your Renegade, this is the essential upgrade to ensure your boat stays safe, leak-free, and ready for action."


BUILT TO OEM SPECS. All tanks are custom-built from original Welding World drawings based on physical measurements or customer-provided information. Tanks are designed to match the original tank dimensions for proper fitment, but Welding World Inc. is not affiliated with or certified by the original boat manufacturer. It is the customer’s responsibility to verify fitment and compliance before production begins.

     

    • IMPORTANT NOTE: The base price is for local pickup in our SW Miami Shop. Check options above for crating and shipping to the contiguous 48 States. All tanks are made to order and the fabrication lead time is 1-2 workweeks. The finished tank pickup window is also 1-2 workweeks, so make sure you will be able to take delivery of your finished tank within that timeframe.  

     

    • Buy with confidence. Shortly after your payment clears you'll be sent via e-mail a complete set of detailed drawings for you to check all dimensions and fittings positions. If there's any difference from your old tank we can make any reasonable modifications to accommodate your needs. Fabrication of your new tank won't start until you send us your specs confirmation.    

      
     

    • .190 thickness Alcoa® 5052 H32 Series aluminum construction.  

      

    • Hand welded GTAW (TIG) welded to exceed ASME / ASW D3.7:2004 standards.

    • Sherwin Williams® TarGard® Epoxy painted for the best marine environment protection. 

    • KUS® (ex-WEMA USA®) reed switch sender with NBR float fuel level. 

     

     NOTE: Check your tank dimensions thoroughly! Once a tank is manufactured and/or shipped we can't be responsible for mismatches and refunds or returns won't be accepted. All sales are final!

    Fabrication lead time (before shipping): 1-2 workweeks. 

    Shipping: Only freight to the 48 contiguous states. Contact us for extra-cost shipping options for HI and AK. Orders for international shipping from US-based carriers are welcome but contact us first to coordinate details.

    Return Policy: No refunds are accepted, as all of our products are made to order. Our policy is strictly limited to the repair or replacement of qualifying defective or damaged goods. Please note that shipping costs are non-refundable.  

    Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

    For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

    All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

    In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

    This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

    You may also like

    Recently viewed

    Back to OEM Replacement Fuel Tanks